The 4 Essential Steps Of Head Gasket Repair

Do you find that your car is not running properly? Is black smoke coming out of your engine? Has your transmission failed? Is your head gasket blown?

These are all some of the most common – and the most severe – issues that can happen with your automobile. Avoid this issue from causing your car to fail completely and notice the signs and symptoms of a blown head gasket before it is too late!

But what is a head gasket? Why is it important in the running of your car? The purpose of the head gasket in your vehicle is to make sure that the pressure from the ignition and the combustion doesn’t overwhelm the car.

If the head gasket is not running correctly, the pressure from the engine’s combustion can cause the car to not be able to run at all. The head gasket is the important part of your vehicle that ensures the built-up pressure and the vapors released by the spark plugs and the engine leave the chamber.

The signs of a blown head gasket are very noticeable and should cause any driver to pull their car off to the side of the road to turn the vehicle off.

The most common signs of the head gasket being blown are white smoke coming out of the rear of the car, bubbling in the coolant reservoir, coolant loss (causing your car to overheat), white colors in the oil, and the engine overheating.

If you notice your car is not running correctly and the engine is very hot, this is an immediate sign that you need to look into products like Steel Seal head gasket repair.

Use Steel Seal

But what is a Steel Seal? Steel Seal is a type of head gasket repair compound that will help fix the head gasket by hardening many areas in the head gasket that have blown or cracked under pressure.

Remove the radiator cap

The second step of using Steel Seal head gasket repair liquid is to remove the radiator cap. Make sure the engine has cooled down before you touch the cap and the engine is off.

Once the radiator cap is removed, you can use the Steel Seal and pour it into the radiator. Make sure once you feel the Steel Seal to the recommended amount that you reseal the radiator cap tightly.

Head Gasket repair

Start the engine

The third step of using Steel Seal head gasket repair liquid is to then start the engine if the vehicle can be driven on the road, keep your engine between 3,000-4,000 RPM and drive the car for 5 miles. If the car is not able to drive on the road, then start the engine and make your car idle at between 1,000 and 1,500 RPM for 30 minutes.

Leave the Steel Seal in your car

The last step of using Steel Seal head gasket repair liquid is to leave the Steel Seal in your radiator and continue driving your car. If you find that your car is driving normally, then you have done the fix correctly!


Do you notice signs of a blown head gasket? If so, using Steel Seal head gasket repair is the most affordable and quickest way to fix this concerning issue in your car!

Related Articles